Arrow Slick Arrow Lubricant
Sale

Arrow Slick Arrow Lube

$18.00 $14.95
(1 review)
Arrow Slick Arrow Lube uses nano-particles to provides a hyper smooth protective film to your arrows, making it easier for you to pull your arrows out of the target.
Current Stock:
Description

Arrow Slick is based on anti-friction nano particle technology, and is a creamy liquid solution that provides incredible release (slick) properties that out-performs the market. The Arrow Slick provides an easy to apply extremely hyper smooth durable thin protective film to most any material or smooth surface using an easy “wipe on - wipe off” application.

Arrow Slick can be repeatedly applied to clean, dry, contamination free surfaces in or out of direct sunlight. Once the material is applied, dries and wiped clean, the surface is ready for immediate use. If time allows, let material fully cure out, the performance properties will be at their best. 50+ shots with each application!

Features & Benefits

  • Air Dry, 10 to 15 minutes
  • Will last an amazing 50+ shots!
  • Extreme Adhesion to Substrate
  • Extremely Durable Wear Surface
  • Two-year shelf life!

Instructions & Application

Arrow Slick is based on anti-friction nano particle technology, and is a creamy liquid solution that provides incredible release (slick) properties that out-performs the market. The Arrow Slick provides an easy to apply extremely hyper smooth durable thin protective film to most any material or smooth surface using an easy “wipe on – wipe off” application.

Arrow Slick can be repeatedly applied to clean, dry, contamination free surfaces in or out of direct sunlight. Once the material is applied, dries and wiped clean, the surface is ready for immediate use. If time allows, let material fully cure out, the performance properties will be at their best. 50+ shots with each application!

 Features & Benefits

  • Air Dry, 10 to 15 minutes
  • Will last an amazing 50+ shots!
  • Extreme Adhesion to Substrate
  • Extremely Durable Wear Surface
  • Two-year shelf life!

Instructions & Application

  1. Shake and Mix well before use. Apply a small amount of Arrow Slick to the surface using a clean lint-free cloth or supplied sponge.  Apply in a circular motion to provide complete coverage.
  2. Allow material to dry to a light haze. Air-dry for 10-15 minutes (will depend upon ambient temperature and humidity conditions). After dry time, lightly buff away haze with a clean lint free cloth.
  3. Full properties achieved in 24 hours or faster with accelerated heat curing (ex. hair dryer). Once complete, keep cap tightly closed and store at room temperature.
  4. Treated arrows will last 50+ shots. Repeat process as needed.

Reviews

  • 4
    Customer review

    Posted by Bill Rhinehart on Apr 15th 2014

    This stuff really works well. It is a bit time consuming to apply and when used on arrows traveling over 300 fps, it will not last 50 shots. Maybe 25 . I make it through a full 3-D event of 42 targets and never need to use a puller. I treat my arrows before the 3-D event and I've never had an issue even when shot into an old McKenzie Target. My bow shoots 292 FPS. It makes a huge difference pulling my arrows. I recommend Arrow Slick.